Management and Maintenance Strategy for Telecom Power Supply System
1. Comprehensive management and maintenance strategy for communication power supply system
As the core component of the communication system, the power supply system is of vital importance. A complete communication power supply system includes five key parts: AC distribution unit, rectifier module, DC distribution unit, battery pack and monitoring system. Such an architecture is not only suitable for power system communication, but also widely used in many fields such as private network communication, public network communication and data center.
When discussing the basic requirements of communication power supply, we emphasize its reliability and stability. Although the impact of a single communication equipment failure may be local, once a problem occurs in the power supply system, the entire communication system will be paralyzed. Therefore, the power supply system must be equipped with backup equipment and adopted reliable battery monitoring and management systems such as leagend UPS battery monitoring and management solution. At the same time, the mains input should have dual or multiple channels to achieve mutual backup between AC and DC.
2. Management and maintenance of communication power supply
In the communication system, the management and maintenance of power supply is particularly critical. Since the power supply system is the "heart" of the entire communication system, its stability and reliability directly affect the normal operation of the system. Therefore, we need to develop a comprehensive and effective management strategy to ensure the continuous and stable operation of the power supply system. This includes regular inspection, maintenance and updating of power supply equipment, as well as monitoring the real-time operating status of the system with reliable battery monitoring and management systems such as leagend UPS battery monitoring and management solution. Through these measures, we can promptly discover and solve potential problems, thereby ensuring the stability and efficiency of the communication system.
3. Deepen the understanding of the importance of power supply equipment
Power supply equipment plays a unique role in the communication network. It is very different from communication equipment such as switching and transmission, and focuses more on the properties of electromechanical equipment. Because of this, in daily communication business, power supply equipment is often overlooked, lacking the necessary investment in organization, personnel, funds and management. However, we must realize that as the energy cornerstone of the telecommunications network, the role of communication power supply is comprehensive and vital. Although it is not a mainstream network device, it is a core element to ensure the stable operation of the communication network.
4. Strengthen professional capabilities in power management
In communication networks, power management is particularly important. In order to ensure the stable operation of the communication network, management levels, construction units and maintenance teams should set up independent power management organizations and equip them with professionals. Since communication power involves multiple systems and disciplines, its professionalism cannot be ignored. Therefore, it is far from enough to rely on other professionals to take on management concurrently. A scientific and professional power management system such as leagend UPS battery monitoring and management solution must be established.
5. Focus on the initial design and installation of communication power supply systems
In the early stages of designing and installing the communication power supply system, it is necessary to comprehensively consider the capacity requirements, geographical location, spatial layout, future development plans, equipment quality, engineering survey and design, operation mode selection, construction management, operation and maintenance, etc. In particular, it is necessary to strengthen the attention and management of equipment selection, scheme design, engineering management, etc. to ensure the stability and safety of the power supply system.
6. Specific measures for purchasing and maintaining power equipment
When purchasing a communications power supply, we need to consider not only its cost-effectiveness, but also its high reliability, diverse automatic protection functions, wide voltage range, good current balancing performance, and online operation mode. We should choose highly reliable equipment and reasonably configure backup equipment to ensure the stability and safety of the power supply system.
In terms of maintenance, we should promote decentralized power supply and ensure that spare parts and backup are available. At the same time, all communication equipment using the same DC voltage should use more than two independent power supply systems to improve the redundancy and reliability of the system. In addition, we should regularly analyze operating parameters, predict the occurrence of faults, and eliminate them in time to minimize the average fault repair time of the equipment.
In order to facilitate replacement and maintenance, the equipment should adopt modular and hot-swappable design. At the same time, we should establish emergency measures for power failure to ensure that power can be restored quickly when a failure occurs. In addition, we should continuously improve the level of technical maintenance and promote the centralized maintenance system to achieve more efficient and intelligent power management.
Centralized monitoring and management are an inevitable trend of technological development and a requirement of modern communication networks. During the implementation process, we should strengthen the maintenance of batteries, because batteries, as a guarantee of uninterrupted power supply, play a vital role in the entire power supply system. Therefore, we need to adopt advanced and reliable battery monitoring and management systems to better and more efficiently ensure the normal operation of batteries.
7. Here is the reliable battery monitoring system for managing communication power supply system better with higher efficiency:
leagend UPS battery monitoring and management solution
leagend UPS battery management solution is a professional solution exclusively developed by leagend SOLUTIONS for the backup power applications such as data center, energy saving, renewable energy, telecom base and machine room. It can guarantee the UPS batteries operate normally by monitoring and managing the key parameters of the lead-acid batteries in real-time to ensure the batteries to supply stable power continuously under the accidence of power outage. This solution integrates with the advanced technologies such as data collection, data transfer, data processing and data display, which dramatically improve and professionalize the UPS power management via digitized and graphical battery SoH (state of health).
Core Advantages of leagend UPS Battery Management Solution
l Comprehensive Monitoring: leagend UPS battery management solution offers real-time and highly precise data monitoring for the battery key parameters such as voltage, current, internal resistance, CCA (Cold Cranking Ampere) and temperature via its data collection module;
l Visualized Data: leagend UPS battery management solution offers an all-in-one computer and management platform to display visualized and graphical data, which helps our customers know and understand the battery SoH easily at a glance;
l Cloud Storage: the monitored data can be transferred to a specified cloud server via its control module to realize global deployment and data checking at any time;
l Highly Tailored Service: as a solution provider, we are pleased to offer highly tailored products and services for our customers based on their demands to meet their different demands for different data center scenarios;
8. Lightning protection measures for communication power supply systems
When managing communication power, we also need to pay attention to a series of management measures for external current and voltage. Among them, since power lines and lightning strikes are the main ways to introduce strong current and voltage, it is particularly important to take corresponding lightning protection measures.
In summary, the stable operation of the communication power supply system and the communication system cannot be separated from professional management and maintenance. It is also necessary to adopt advanced and reliable battery monitoring and management systems to ensure the reliability and efficiency of the communication network.
